ilopad
Manual

App settings

Open the settings

You can open the settings from the server list or during a session.

From the server list

  1. Tap the gear at the top right of the Servers screen.

You do not need a connection for this. Thus you can change the general settings and buy or restore ilopad Pro before you pair a server.

During a session

  1. If the toolbar is hidden, tap the tab at the top right corner of the screen. In gamepad mode, the tab is at the top center. VoiceOver calls it Show toolbar.
  2. Tap the gear (Settings) in the toolbar.

On a narrow screen, the toolbar has no space for the gear. Then tap the round button with three dots . Tap Settings in the menu. VoiceOver calls this button More controls.

The settings open on the page of the mode that you use. Gamepad mode has no settings page. Thus, from gamepad mode, the settings open on the main screen.

Move in the settings

The main screen of the settings has three parts:

  • ilopad Pro: the trial or purchase status, Restore Purchase, and the version. See ilopad Pro and the trial.
  • General: the settings for all modes. See General settings.
  • Modes: one page for each of Touchpad, Pencil and Pointer.

Tap a row to open its page. To return to the main screen, tap the back arrow at the top left. Tap Done at the top right to close the settings.

The main settings screen on an iPhone: the ilopad Pro card with the trial status, Buy and Restore Purchase, the General row, and the Modes rows Touchpad, Pencil and Pointer.
The main settings screen. The trial status and the purchase buttons are at the top.
The General settings page on an iPhone: Theme with System, Light and Dark, Haptic Feedback, Keep Screen Awake, and the Toolbar group with Auto-Hide and Hide Delay.
The General page.

Change the mode

The mode button is the colored button near the right end of the toolbar. It shows the icon of the mode and a down arrow . When the screen is wide, for example on an iPad in full screen, it also shows the name of the mode .

  1. Tap the mode button .
  2. Tap Touchpad , Pencil , Gamepad or Pointer .
The top of the touchpad screen on an iPad, with the mode menu open from the Touchpad button. The menu shows Touchpad, Pencil, Gamepad and Pointer.
The mode menu, open from the mode button in the toolbar.

Some servers cannot operate a game controller:

  • A macOS server cannot operate a game controller. The menu then does not show Gamepad.
  • If the server needs a driver first, the menu shows Gamepad. When you tap it, the app tells you why the mode is not available. The app also lets you install the driver. See The Windows driver.

After you start the app, the first connection opens in touchpad mode. Until the app closes, each new connection opens in the last mode that you used.

The app has no orientation setting. Each mode sets the orientation that it needs. On an iPhone, pencil mode turns the screen to landscape. Pointer mode turns it to portrait. Touchpad mode and gamepad mode follow the orientation in which you hold the device.

General settings

These settings apply to all modes and to all servers. The app keeps them on the device. They are available on the iPhone and on the iPad.

To open them, tap General on the main settings screen.

SettingWhat it doesDefault
Theme Sets the colors of the app. System follows the light or dark appearance of the device. Light and Dark keep the app in one appearance. The theme of the server on the computer is a different setting. Dark
Haptic Feedback Lets the device vibrate lightly. Examples: a click on the touchpad, a button press, a change of mode, a completed connection, a scanned pairing code. On
Keep Screen Awake While the app has a connection to a server, the screen does not dim and the device does not lock. When the session stops, the device uses its usual Auto-Lock setting again. On
Auto-Hide (in Toolbar) Hides the toolbar of the mode when you do not touch it. To show it again, tap the tab at the top of the screen. The toolbar does not hide while the settings are open or while you edit a layout. Off
Hide Delay (in Toolbar) The number of seconds with no touch on the toolbar before it hides. The range is 2 to 30 seconds. You see this setting only when Auto-Hide is on. 5 s
An iPad has no vibration motor. Thus Haptic Feedback has no effect on an iPad.

The toolbar also has its own hide button at its right end. When you hide the toolbar with this button, it stays hidden until you tap the tab at the top of the screen.

Settings for each server

Some settings depend on the computer screen and on where you sit. Thus the app keeps a different value for each server that you paired. When you connect to a server, the app loads the values for that server.

SettingPageDefault for a new server
SensitivityTouchpad1.5
Absolute PointingPointerOff
Horizontal SensitivityPointer30 with Absolute Pointing off, 20 with it on
Vertical SensitivityPointer15 with Absolute Pointing off, 35 with it on

Pointer mode keeps one pair of sensitivity values for each pointing method. The page shows the pair for the method that is on. When you calibrate the aim in pointer mode, the app saves new values for Absolute Pointing for that server. It also turns Absolute Pointing on. See Calibrate the aim.

Why these settings need a connection

The app keeps each of these values for one server. When you open the settings from the server list, no server is connected. Thus the app cannot know which server to change. It shows these settings dimmed, and you cannot change them. Below them, a note says: These settings are saved for each server. Connect to a server to change them.

When you tap a dimmed setting, the note flashes two times. This shows you why you cannot change the setting. With VoiceOver, the dimmed setting tells you to connect to a server.

The Pointer settings page on an iPhone with no connection. Absolute Pointing and the two sensitivity sliders are dimmed, and the note below them says that these settings are saved for each server. Stabilization, Click Hold and Invert Button Order below are not dimmed.
The Pointer page with no connection. The settings for each server are dimmed. The settings below the note apply to all servers and stay available.

Change a setting for one server

  1. Connect to the server.
  2. Tap the gear (Settings) in the toolbar.
  3. If the page of the mode does not open, tap Touchpad or Pointer.
  4. Move the slider or tap the switch.
  5. Tap Done.

The change applies only to the connected server. The app keeps it after the session stops.

The other settings on the Pointer page apply to all servers: Stabilization, Click Hold, Scrolling and Invert Button Order. You can change them without a connection.

When you delete a server from the server list, the app also deletes the settings that it kept for that server. If you pair the same computer again, these settings have their default values again. See Remove a device or a server.

Settings of each mode

The chapter of each mode tells you about its settings:

ilopad Pro and the trial

ilopad Pro is a one-time purchase in the app. The server on the computer is free. It has no trial and no purchase.

How the trial works

PeriodWhat you get
The first 7 days after you install the app All the functions of the app, with no limit and no reminder.
After the 7 days 15 free minutes of use each day. After the free minutes, the app shows a Buy ilopad Pro reminder. It shows the reminder again after each 10 more minutes of use. All the functions of the app continue to operate.
After you buy ilopad Pro No limit and no reminder.

The app counts the time while it is open on the screen, with or without a connection. The count starts again at midnight, local time.

To close the reminder, tap Maybe Later or swipe the reminder down.

See the status

  • On the Servers screen, a label next to the gear shows the number of days that remain, for example 7 days left. After the trial, it shows Trial expired. Tap the label to open the purchase screen. After the purchase, the app removes the label.
  • In the settings, the ilopad Pro card shows Status. The value is the number of days that remain, the number of days since the end of the trial, or Purchased. The text below the value gives more information about the status, for example the free minutes that remain today.

Buy ilopad Pro

  1. Open the settings.
  2. In the ilopad Pro card, tap the button that shows Buy for and the price. If the App Store has not sent the price yet, the button shows Buy Now.
  3. Confirm the purchase in the App Store window.

You can also tap Buy for on the reminder. Or tap Buy for on the purchase screen that opens from the label on the Servers screen.

When the purchase is complete, Status shows Purchased. The app then removes the two buttons.

Restore the purchase

Use this procedure after you install the app again. Also use it on a second device with the same Apple ID.

  1. Open the settings.
  2. In the ilopad Pro card, tap Restore Purchase.

The reminder and the purchase screen also have Restore Purchase.

A purchase that Family Sharing shares with you also unlocks the app.

Messages

MessageWhat it means and what to do
Purchase pending The purchase needs approval, for example from a parent. ilopad Pro unlocks when the approval comes. You do not need to do anything.
Store unavailable The app cannot get ilopad Pro from the App Store. Make sure that the device has an internet connection. Then try again.
Purchase failed The App Store did not complete the purchase. The message gives the reason from the App Store.
No purchase found The Apple ID on the device did not buy ilopad Pro. Sign in with the Apple ID that bought it. Then try again.
Restore failed The App Store did not restore the purchase. The message gives the reason from the App Store.

If you cancel the App Store window, the app shows no message.

Version, help and privacy

  • Version: the last rows of the ilopad Pro card show the version of the app and the copyright. Give the version when you ask for help.
  • Help: the app has no help screen. Use this manual. To contact us, use the Support page.
  • Privacy: the app has no privacy screen. Read the ilopad App Privacy Policy.
  • Reset: the app has no command that resets all settings. To set a value to its default again, change its control. To remove a server and the settings that the app keeps for it, delete the server. See Remove a device or a server.